Menu
Cart 0

Car Bumper Protection - Invisible Film Tape Protects from Stone Chips Scratches & Bumps 250mm x 100mm

  • £13.95 GBP


 
You are purchasing a 25cm (10 inch) length of this Polyurethane Bike Tape. Width is 10cm (4").
 
This 8671HS clear super tough tape is made by 3M is perfect for protecting vulnerable areas on your car or bike.
 
This is the highest grade exterior 3M helicopter tape available. It is UV resistant and will not discolour.

Simply cut your tape to the shape your require.

SAVE MONEY BY BUYING MORE FOR NO ADDITIONAL POSTAGE COST... If you want more than 25cm x 10cm, simply add to the quantity box in your order e.g. a quantity of 3 will give you a 75cm x 10cm piece of tape.

 
8671HS Product Features:
  • Tear & abrasion resistant
  • Completely transparent
  • Ease of application
  • Superior adhesion without the use of a primer
Product Applications 
The tape is extremely tough & totally transparent and is extremely effective at preventing damage caused by stone chips, abrasion, erosion, minor impacts etc.
For example:
 - Protect your front bumper from stone chips
 - Protect your door edges when opening doors in tight spaces
 - Protect your wing mirrors from bumps and knocks
Simply cut the tape to the size required using sharp scissors.
Then remove the protective liner and position the adhesive tape as required.
 
Additional Product Information
Polyurethane Protective Tapes are a fast and exact way to provide exceptionally tough surface protection on metals, woods and plastics.
This tape is made from a highly durable thermoplastic elastomer and precoated with a high performance acrylic adhesive.
It conforms well to curvatures, can be pre-cut into convenient shapes and can even be painted or printed over.
 
3M's Product Description
3M 8671HS is made of an exceptionally tough abrasion and erosion resistant polyurethane formulated especially for its excellent resistance to ultraviolet light. 
There is little or no discolouration after prolonged periods of environmental exposure. 
The high shear strength (HS) capability of this product was formulated to give better erosion resistance and better performance at high temperatures (such as those caused by aerodynamic heating), while providing better peel strength and shock resistance at very low temperatures. 
8671HS comes pre-coated with a long-ageing, solvent resistant, pressure sensitive acrylic adhesive and is protected with an easy release liner. 
8671HS can be applied by normal "wet" application techniques which allow ready sliding and repositionability, or by dry application techniques where complex curves need to be coated while allowing some repositionability. 
The product is easy to apply and stretches to conform to difficult contours where this is desired. For especially high adhesion the surface to be coated can be primed with 3M Adhesion Promoter 86.

See the following link for more detailed product information: 3M 8671HS Datasheet


We Also Recommend